Z axis is not working properly

Technician April 5, 2021, 9:18am 1

1.Possible cause analysis of failure:The manufacturer’s parameter setting is wrong (the direction of the step width is wrong).
2.Solution:Reset the paremeters.

Topic	Replies	Views
The cutting figure is different from the actual figure size FAQ	269	April 5, 2021
XY axis does not move when reset FAQ	288	April 5, 2021
The Z axis makes noise as it goes up and down FAQ	264	March 23, 2021
When the reset is started,the X axis stops after touching the limit switch,while the Y axis is still running very slowly FAQ	291	March 30, 2021
Trying to cut a squre results in a parallelogram FAQ	264	March 30, 2021

Z axis is not working properly

Related topics