First connect the computer and the panel with a networkcable.
1． Right-click onthe WIFi icon and click “Open Network and Internet Settings”
2． Click on Changeadapter option
3． Local ConnectionRight-click Properties
4. Double-clickInternet Protocol Version 4 (TCP / IPv4)
5． Tick with the IPaddress below
6． Enter the IPaddress192.168.8.20
The IP address of PC should be in the same networksegment with main-board.
The default IP address of mainboard is 192.168.1.1, sothe PC IP address should be 192.168.1.X
7. Click “OK”，and click “OK”
8. Start LaserCAD，select network mode
9. Double-click “MachName”
10. Make sure the same IP address asmainboard
11. Click “OK” to end the networkconnection