Trocen Set the Z-axis autofocus elementand wiring
1. On the ManufactureParams Settings page, move cursor to【Function Config】and press【Enter】. Press【←】【→】to modify optionsand press【Enter】to save settings.→Select Enable
- On the Manufacture Params Settings page, move cursor to【Auto Reset Settings】and press【Enter】. Press【↑】【↓】to move cursor, press【←】【→】to modify options and press【Enter】to save settings. →Select Enable
In general, we suggest users to enableaxis AutoReset function, and
disable the feed axis AutoReset.
3. On the Common Params Settings page, move cursor to【Common Parameters】and press【Enter】. Press【↑】【↓】to move cursor and press【Z↑】【Z↓】to modifyparameters, press【Enter】to savesettings.
The【Z AutoFocus】function is mainly used to controlthe distance between the laser head and the work table. If the Z axis is usedas the lifting shaft or platform lifting shaft, users can turn on the【Z AutoFocus】function on the Function Configpage (【Manufacturer Params Settings】→【Function Config】) andset 【AutoFocus Distance】here tokeep the distance between laser head and working table.
4. On the main page, press【Menu】and move cursor to【Axes Control】, press【Enter】toenter Axes Control page. Press【↑】【↓】to move cursor, and press【Enter】.
The Z axis can be used as the lifting shaft, platformlifting shaft. When the Z axis is reset, the Z axis will stop at the limiterposition.
5.Wiring of controller and Auto focus sensor