Rotation axis tutorial

Laser Marking & Engraving Software
1

I. The application of text to the axis of rotation

  1. New Text (refers to the text created on EZCAD)，Click the icon Fi on the left and drag it into the marking box on the right.
    2.Change the direction of the text.
    image
    3.Click on the menu bar - Laser - Rotate Text Marking - Parameters.
    image
    image
    image554×521 79.4 KB

    4.Enable Rotation Axis, Enable Inversion, Enable Y Axis
    The value of the number of pulses per revolution is determined based on the subdivision on the stepper driver that actually uses the rotation axis.The usual number of pulses used is 25600.
    5.When the rotation axis is enabled, the value of the deceleration ratio is determined according to the deceleration ratio of the rotation axis. The diameter of the workpiece is the actual diameter of the workpiece to be processed.

II. The application of vector drawing in the axis of rotation
1.File - Import vector graph.
image
2.Menu bar - laser ----- segmentation mark 2
image
image
3.Enable Rotation Axis, Enable Inversion, Enable Y Axis
The value of the number of pulses per revolution is determined based on the subdivision on the stepper driver that actually uses the rotation axis.The usual number of pulses used is 25600.
4.When the rotation axis is enabled, the value of the deceleration ratio is determined according to the deceleration ratio of the rotation axis. The diameter of the workpiece is the actual diameter of the workpiece to be processed.
5.The smaller the cutting size, the better the carving effect, usually the cutting size is 1.