The floodlight of the camera is not bright

Technician · March 31, 2021, 3:30am

1.Possible cause analysis of failure:
a.Incorrect wiring.
b.The filament is broken.

2.Solutions:Check whether the light is broken,the cable is broken,the connect of the cable is incorrect.

Topic	Replies	Views
After correcting the cut cross,the cut cross is not even,or has deviation FAQ	272	March 30, 2021
The laser tube does not emit light FAQ	291	March 23, 2021
Can not cut through the object to be cut FAQ	276	March 30, 2021
The laser keeps emitting light FAQ	272	April 5, 2021
When the cutting head works,sometimes it can be lowered,sometimes it caannot be lowed FAQ	238	April 5, 2021