No display on control panel

Technician April 5, 2021, 8:48am 1

1.Possible cause analysis of failure:The MCU program is destroyed.
2.Solution:Reburn the MCU.

Topic	Replies	Views
When the boot panel can not load,no cuisor flashing,black screen FAQ	233	March 30, 2021
The panel indicates that the machine is protected after cilck the start FAQ	276	March 30, 2021
The axis will reset automatically when the 6432 board card is pressed up and down on the panel FAQ	291	March 30, 2021
HYZ100 power supply is connected with 6445G, why there is no display on the panel FAQ	360	April 17, 2021
XY axis does not move when reset FAQ	288	April 5, 2021