Cutting will cause problems in the picture

Technician April 20, 2021, 9:33am 1

1.Problem description:

2.Analysis:A part of the light path hits the copper nozzle, and the light path needs to be adjusted.

Topic	Replies	Views
Can not cut through the object to be cut FAQ	276	March 30, 2021
The cutting pattern is not closed or the light is uneven FAQ	270	April 5, 2021
The depth of cutting or engrving is not enough FAQ	286	March 30, 2021
After correcting the cut cross,the cut cross is not even,or has deviation FAQ	272	March 30, 2021
The laser light is weak and cannot be controlled FAQ	335	April 5, 2021