# When the reset is started,the X axis stops after touching the limit switch,while the Y axis is still running very slowly

**URL:** https://forum.cloudray.com/t/when-the-reset-is-started-the-x-axis-stops-after-touching-the-limit-switch-while-the-y-axis-is-still-running-very-slowly/158
**Category:** FAQ
**Created:** [March 30, 2021, 2:42am UTC](https://forum.cloudray.com/t/when-the-reset-is-started-the-x-axis-stops-after-touching-the-limit-switch-while-the-y-axis-is-still-running-very-slowly/158 "2021-03-30T02:42:58Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)
#### Post date: [March 30, 2021, 2:42am UTC](https://forum.cloudray.com/t/when-the-reset-is-started-the-x-axis-stops-after-touching-the-limit-switch-while-the-y-axis-is-still-running-very-slowly/158/1 "2021-03-30T02:42:58Z")

</div>

1.Possible cause analysis of failure:Maybe the Y-axis is the opposite polarity.  
2.Solution:Reset the polarity.

 ![13](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/e5b2b876dee6b9624967d1c54b65a311973a7cd0.jpeg)