# Using Laserbox Basic for the engrave

**URL:** <https://forum.cloudray.com/t/using-laserbox-basic-for-the-engrave/640>\
**Category:** Laser DIY Tutorial\
**Created:** [December 13, 2021, 9:26am UTC](https://forum.cloudray.com/t/using-laserbox-basic-for-the-engrave/640 "2021-12-13T09:26:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Austin](https://avatars.discourse-cdn.com/v4/letter/a/77aa72/32.png) [@Austin](https://forum.cloudray.com/u/Austin)\
**Post date:** [December 13, 2021, 9:26am UTC](https://forum.cloudray.com/t/using-laserbox-basic-for-the-engrave/640/1 "2021-12-13T09:26:23Z")

</div>

I sprayed the tumbler with LaserBond 100, Stainless Steel Setting, 100% power, 25mm/s

 ![266830936_1086379538776083_7308203159822248156_n](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/2a91bba7241ebba1696438bf1fa3c20e83c9ea58.jpeg)