# Trying to cut a squre results in a parallelogram

**URL:** <https://forum.cloudray.com/t/trying-to-cut-a-squre-results-in-a-parallelogram/165>\
**Category:** FAQ\
**Created:** [March 30, 2021, 6:22am UTC](https://forum.cloudray.com/t/trying-to-cut-a-squre-results-in-a-parallelogram/165 "2021-03-30T06:22:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [March 30, 2021, 6:22am UTC](https://forum.cloudray.com/t/trying-to-cut-a-squre-results-in-a-parallelogram/165/1 "2021-03-30T06:22:25Z")

</div>

1.Possible cause analysis of failure:  
a.X and Y guide rails are not vertical.  
b.X and Y axis breadth and step length are not correct.

2.Solutions:  
a.Adjust the perpendicularity of X and Y guides.  
b.Reset the breadth and step length

 ![幅面](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/d82d9bf086b04bd8c8f365f1655db5d7177c9d15.jpeg) .