# The Z axis makes noise as it goes up and down

**URL:** <https://forum.cloudray.com/t/the-z-axis-makes-noise-as-it-goes-up-and-down/141>\
**Category:** FAQ\
**Created:** [March 23, 2021, 2:14am UTC](https://forum.cloudray.com/t/the-z-axis-makes-noise-as-it-goes-up-and-down/141 "2021-03-23T02:14:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [March 23, 2021, 2:14am UTC](https://forum.cloudray.com/t/the-z-axis-makes-noise-as-it-goes-up-and-down/141/1 "2021-03-23T02:14:25Z")

</div>

1.Possible cause anlysis of failure:  
(1)Check whether the Z axis step spacing and format are adjusted properly.  
(2)Z-axis driving problem.

2.Solutions:  
(1)Readjust the parameters.  
(2)Increase or decrease the current of the Z-axis drive(current subdivision).