# The cutting figure is not closed

**URL:** https://forum.cloudray.com/t/the-cutting-figure-is-not-closed/151
**Category:** FAQ
**Created:** [March 30, 2021, 1:41am UTC](https://forum.cloudray.com/t/the-cutting-figure-is-not-closed/151 "2021-03-30T01:41:48Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)
#### Post date: [March 30, 2021, 1:41am UTC](https://forum.cloudray.com/t/the-cutting-figure-is-not-closed/151/1 "2021-03-30T01:41:49Z")

</div>

1.Possible cause analysis of failure:  
The take-off speed and acceleration are too large,the processing speed is too high,and there is reverse clearance.  
2.Solution:decrease the take-off speed,the acceleration and the processing speed.Adjust the reverse clearance.

 ![6.1](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/4db8ce1f830e3002bd166a9563eb0144c9a563df.jpeg) ![6.2](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/7e3804284a7af0c00558f283665e325e869bd214.jpeg)