# The axis will reset automatically when the 6432 board card is pressed up and down on the panel

**URL:** <https://forum.cloudray.com/t/the-axis-will-reset-automatically-when-the-6432-board-card-is-pressed-up-and-down-on-the-panel/148>\
**Category:** FAQ\
**Created:** [March 30, 2021, 1:27am UTC](https://forum.cloudray.com/t/the-axis-will-reset-automatically-when-the-6432-board-card-is-pressed-up-and-down-on-the-panel/148 "2021-03-30T01:27:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [March 30, 2021, 1:27am UTC](https://forum.cloudray.com/t/the-axis-will-reset-automatically-when-the-6432-board-card-is-pressed-up-and-down-on-the-panel/148/1 "2021-03-30T01:27:40Z")

</div>

1.Possible cause analysis of failure:Keys appear garbled,programe or microcontroller bad.  
2.Solution:Change the mask or re-burn the program.