# Stock Firmware Ruida 6445S

**URL:** <https://forum.cloudray.com/t/stock-firmware-ruida-6445s/646>\
**Category:** Ruida-Controller\
**Created:** [December 21, 2021, 3:08am UTC](https://forum.cloudray.com/t/stock-firmware-ruida-6445s/646 "2021-12-21T03:08:41Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![feetline](https://avatars.discourse-cdn.com/v4/letter/f/ea5d25/32.png) [@feetline](https://forum.cloudray.com/u/feetline)\
**Post date:** [December 21, 2021, 3:08am UTC](https://forum.cloudray.com/t/stock-firmware-ruida-6445s/646/1 "2021-12-21T03:08:41Z")

</div>

Good evening, I have a Ruida 6445S controller which has problems with the U axis, when trying to engrave with the rotary activated the Y axis moves instead of the U axis, I would like to try flashing the firmware again 01.26.13 for this motherboard, could you share the download link to perform this test ?. From already thank you very much.  
Greetings.

---

<div class="post-metadata">

**Author:** ![Goodman](https://avatars.discourse-cdn.com/v4/letter/g/838e76/32.png) [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Post date:** [December 21, 2021, 5:47am UTC](https://forum.cloudray.com/t/stock-firmware-ruida-6445s/646/2 "2021-12-21T05:47:56Z")

</div>

Not sure if there is a save here, but You can find it here on the [Google Mod Page](https://drive.google.com/drive/folders/1LZCZulbJ9a-00VZoR4JLNN7JKcqX-vHh) at the top.

---

<div class="post-metadata">

**Author:** ![feetline](https://avatars.discourse-cdn.com/v4/letter/f/ea5d25/32.png) [@feetline](https://forum.cloudray.com/u/feetline)\
**Post date:** [December 21, 2021, 12:55pm UTC](https://forum.cloudray.com/t/stock-firmware-ruida-6445s/646/3 "2021-12-21T12:55:17Z")

</div>

Thank you very much, look at the link and this is the version 26.01.16 that my controller has and has that problem, I would need the 26.01.13. I appreciate the contribution. Greetings.

---

<div class="post-metadata">

**Author:** ![feetline](https://avatars.discourse-cdn.com/v4/letter/f/ea5d25/32.png) [@feetline](https://forum.cloudray.com/u/feetline)\
**Post date:** [December 21, 2021, 10:59pm UTC](https://forum.cloudray.com/t/stock-firmware-ruida-6445s/646/4 "2021-12-21T22:59:09Z")

</div>

You can now solve the problem, for some reason when updating the firmware to version 26.01.16 the Y axis was selected as the axis of rotation, and having an old version of RDWORK, could not select the axis of rotation U, Thanks Goodman, since in the repository I found the latest version and can solve the problem. Greetings.
