# Rotary Issues **URL:** \ **Category:** Laser Marking & Engraving\ **Created:** [February 18, 2023, 10:40pm UTC](https://forum.cloudray.com/t/rotary-issues/1065 "2023-02-18T22:40:11Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![toby](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toby](https://forum.cloudray.com/u/toby)\ **Post date:** [February 18, 2023, 10:40pm UTC](https://forum.cloudray.com/t/rotary-issues/1065/1 "2023-02-18T22:40:11Z")
I have a 60w mopa Cloudray machine and a d80 rotary, and i recently started to use the rotary to engrave tumblers and it worked great with my 110mm lens, but when i switched to my 300mm lens, it started doing weird stuff. Now when I frame something up with the rotary enabled, it frames it several inches lower than where i have it in Lightburn. It doesn’t seem to matter where I have the graphic framed up in Lightburn, it always engraves way at the bottom of the work area. Any help is much appreciated ![20230218_143412](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/ef66c0150253ffad406cf8683bfa1eab8b155377.jpeg) This picture is where it is engraving, the red laser on my hand. ![20230218_143358](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/c36da4a6fe7326c866acd970da2505859737db45.jpeg) This picture is how I have it framed in Lightburn, centered on the tumbler. ---
**Author:** ![Polaris](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/polaris/32/831_2.png) [@Polaris](https://forum.cloudray.com/u/Polaris)\ **Post date:** [February 20, 2023, 6:53am UTC](https://forum.cloudray.com/t/rotary-issues/1065/2 "2023-02-20T06:53:12Z")
By the way, when you change the lens from 110 to 300, have you calibrated the work area？ ---
**Author:** ![toby](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toby](https://forum.cloudray.com/u/toby)\ **Post date:** [February 21, 2023, 7:58pm UTC](https://forum.cloudray.com/t/rotary-issues/1065/3 "2023-02-21T19:58:22Z")
I got it figured out, there is a setting for output center in the rotary framing window, i just adjusted that and it fixed it.