# Panel Warning:No enough extend space

**URL:** https://forum.cloudray.com/t/panel-warning-no-enough-extend-space/110
**Category:** FAQ
**Created:** [March 22, 2021, 3:05am UTC](https://forum.cloudray.com/t/panel-warning-no-enough-extend-space/110 "2021-03-22T03:05:43Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)
#### Post date: [March 22, 2021, 3:05am UTC](https://forum.cloudray.com/t/panel-warning-no-enough-extend-space/110/1 "2021-03-22T03:05:43Z")

</div>

The alarm means there is not enough buffer space for axis moving. You need to change the user parameter-\>sweep parameter-\>x/y Acc in software RDworks(See attachment).  
 ![3](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/99583b11d96dc1762cf0c6a939201dfa49f82499.jpeg)

 ![4](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/9bc99113380b9da6e059d5d50f7b00dc8c77cfa1.png)