# MYJG150W, everything is normal, all connections are correct, but if you try to make a complete grating engraving, even if the power is reduced to a minimum, it will become too deep and can only be cut

**URL:** <https://forum.cloudray.com/t/myjg150w-everything-is-normal-all-connections-are-correct-but-if-you-try-to-make-a-complete-grating-engraving-even-if-the-power-is-reduced-to-a-minimum-it-will-become-too-deep-and-can-only-be-cut/272>\
**Category:** FAQ\
**Created:** [April 16, 2021, 6:37am UTC](https://forum.cloudray.com/t/myjg150w-everything-is-normal-all-connections-are-correct-but-if-you-try-to-make-a-complete-grating-engraving-even-if-the-power-is-reduced-to-a-minimum-it-will-become-too-deep-and-can-only-be-cut/272 "2021-04-16T06:37:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [April 16, 2021, 6:37am UTC](https://forum.cloudray.com/t/myjg150w-everything-is-normal-all-connections-are-correct-but-if-you-try-to-make-a-complete-grating-engraving-even-if-the-power-is-reduced-to-a-minimum-it-will-become-too-deep-and-can-only-be-cut/272/1 "2021-04-16T06:37:42Z")

</div>

Lower the maximum energy and minimum energy of the laser energy a bit.