# My cloudray Laser never fires at first commissioning

**URL:** <https://forum.cloudray.com/t/my-cloudray-laser-never-fires-at-first-commissioning/1787>\
**Category:** CO2 Laser Cutting & Engraving\
**Created:** [September 21, 2026, 5:17pm UTC](https://forum.cloudray.com/t/my-cloudray-laser-never-fires-at-first-commissioning/1787 "2026-09-21T17:17:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![alainj](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/alainj/32/939_2.png) [@alainj](https://forum.cloudray.com/u/alainj)\
**Post date:** [September 21, 2026, 5:17pm UTC](https://forum.cloudray.com/t/my-cloudray-laser-never-fires-at-first-commissioning/1787/1 "2026-09-21T17:17:17Z")

</div>

Hi,  
I own a Bluedream 70W from Cloudray (it’s a CR5030) but I try to fire it with no avail. Instead of a complete explanation of what I have already done, I prefer to ask my qustion bit by bit as they occurred. Maybe it will be easier to find help with the community.

So my first question is:  
When I sterted it, i got “manual” on the start screen of the Ruida. After a few tries, “manual” changed to “continue” and its not really documented in the Ruida user guide. How can I revert to manual (if needed). Is it because of this mention “continue” that I can’t fires it?

Best regards,

Plouf