# Initial D80 rotary setup with MP60 **URL:** \ **Category:** Laser Marking & Engraving\ **Created:** [May 15, 2024, 8:21pm UTC](https://forum.cloudray.com/t/initial-d80-rotary-setup-with-mp60/1475 "2024-05-15T20:21:36Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![bwarner](https://avatars.discourse-cdn.com/v4/letter/b/9dc877/32.png) [@bwarner](https://forum.cloudray.com/u/bwarner)\ **Post date:** [May 15, 2024, 8:21pm UTC](https://forum.cloudray.com/t/initial-d80-rotary-setup-with-mp60/1475/1 "2024-05-15T20:21:36Z")
I am having trouble getting my rotary set up. It makes the initial marks but when the rotary moves the piece the laser engraves over what was previously done. I have tried setting the steps per rotation at 12800 and 25600 and get the same result. I have also checked and double checked the diameter of the work piece. I have also tried changing the split size up and down and get the same results. Any help is appreciated, thanks! ---
**Author:** ![bwarner](https://avatars.discourse-cdn.com/v4/letter/b/9dc877/32.png) [@bwarner](https://forum.cloudray.com/u/bwarner)\ **Post date:** [May 15, 2024, 9:08pm UTC](https://forum.cloudray.com/t/initial-d80-rotary-setup-with-mp60/1475/2 "2024-05-15T21:08:01Z")
Update: I can get engraving to not overlap by changing “split size” below 1mm, but it warps the text to be very tall and narrow. So I am closer but still need help. ---
**Author:** ![bwarner](https://avatars.discourse-cdn.com/v4/letter/b/9dc877/32.png) [@bwarner](https://forum.cloudray.com/u/bwarner)\ **Post date:** [May 16, 2024, 6:20pm UTC](https://forum.cloudray.com/t/initial-d80-rotary-setup-with-mp60/1475/4 "2024-05-16T18:20:48Z")
Did figure out steps are 12800, makes a perfect complete rotation on test at that setting. ---
**Author:** ![bwarner](https://avatars.discourse-cdn.com/v4/letter/b/9dc877/32.png) [@bwarner](https://forum.cloudray.com/u/bwarner)\ **Post date:** [May 16, 2024, 6:21pm UTC](https://forum.cloudray.com/t/initial-d80-rotary-setup-with-mp60/1475/5 "2024-05-16T18:21:25Z")
Smaller line intervals help but still compressed along axis of rotation