# EZCAD software does not work and cannot be filled

**URL:** <https://forum.cloudray.com/t/ezcad-software-does-not-work-and-cannot-be-filled/282>\
**Category:** Software\
**Created:** [April 17, 2021, 1:57am UTC](https://forum.cloudray.com/t/ezcad-software-does-not-work-and-cannot-be-filled/282 "2021-04-17T01:57:46Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [April 17, 2021, 1:57am UTC](https://forum.cloudray.com/t/ezcad-software-does-not-work-and-cannot-be-filled/282/1 "2021-04-17T01:57:46Z")

</div>

Before starting EZCAD, close the anti-virus software and computer housekeeper and other software. The compressed file is saved in the U disk, unzip it and try to open it (some files in the original folder may be damaged, causing EZCAD to fail to start).

---

<div class="post-metadata">

**Author:** ![nileshbarange](https://avatars.discourse-cdn.com/v4/letter/n/a88e57/32.png) [@nileshbarange](https://forum.cloudray.com/u/nileshbarange)\
**Post date:** [May 28, 2021, 3:59pm UTC](https://forum.cloudray.com/t/ezcad-software-does-not-work-and-cannot-be-filled/282/2 "2021-05-28T15:59:20Z")

</div>

Where can I find EZCAD software?

---

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [May 31, 2021, 1:20am UTC](https://forum.cloudray.com/t/ezcad-software-does-not-work-and-cannot-be-filled/282/3 "2021-05-31T01:20:26Z")

</div>

Hi nileshbarange,  
Here is the link of downloading address:  
[https://cloudray2021.oss-us-west-1.aliyuncs.com/Product%20information/Software%26Board/JCZ%20Software/金橙子软件/Ezcad2.14.11(20191022).rar](https://cloudray2021.oss-us-west-1.aliyuncs.com/Product%20information/Software%26Board/JCZ%20Software/%E9%87%91%E6%A9%99%E5%AD%90%E8%BD%AF%E4%BB%B6/Ezcad2.14.11(20191022).rar)

if you have any use problem,you can post here.

---

<div class="post-metadata">

**Author:** ![nileshbarange](https://avatars.discourse-cdn.com/v4/letter/n/a88e57/32.png) [@nileshbarange](https://forum.cloudray.com/u/nileshbarange)\
**Post date:** [June 1, 2021, 3:23pm UTC](https://forum.cloudray.com/t/ezcad-software-does-not-work-and-cannot-be-filled/282/4 "2021-06-01T15:23:25Z")

</div>

Thank you for the link.  
I have Galvo Scan Head 10.6um and JCZ FBLI-B-V4 broad.  
But can’t connect it to EzCAD.

Do you know the procedure? or standard operating manual.

Thank you,  
Nilesh

---

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [June 2, 2021, 1:35am UTC](https://forum.cloudray.com/t/ezcad-software-does-not-work-and-cannot-be-filled/282/5 "2021-06-02T01:35:47Z")

</div>

Hi Nilesh,  
Here is the operating manual,hope it’s helpful for you.

[FBLMCB-V4.pdf](https://forum.cloudray.com/uploads/short-url/7rUkNLnMIvJEMCqTSDAGzVinfk6.pdf) (719.2 KB)