# Converting an OEM JG40 to an M60 CloudRay

**URL:** <https://forum.cloudray.com/t/converting-an-oem-jg40-to-an-m60-cloudray/1490>\
**Category:** Laser Power Supply\
**Created:** [May 28, 2024, 11:32pm UTC](https://forum.cloudray.com/t/converting-an-oem-jg40-to-an-m60-cloudray/1490 "2024-05-28T23:32:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tzsetzse](https://avatars.discourse-cdn.com/v4/letter/t/e9bcb4/32.png) [@Tzsetzse](https://forum.cloudray.com/u/Tzsetzse)\
**Post date:** [May 28, 2024, 11:32pm UTC](https://forum.cloudray.com/t/converting-an-oem-jg40-to-an-m60-cloudray/1490/1 "2024-05-28T23:32:18Z")

</div>

I posted this same question in the general category.

 ![A61AECA6-986E-4160-80B7-DDF10E16A74B_1_201_a](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/0f9504dd00ae6067048e11eb34ca87d2f4628cef.jpeg)

Shown is the OEM,(blue) . The pins are identified but do not match the M60. I realize I will need to eliminate the connectors on the OmTech 40 watt to connect to the M60 CloudRay lps. No challenge there. However, I’m going to ask if someone could provide me a diagram showing the 2 lps’s and where each wire must go for the new replacement.  
I know this is fundamental stuff but I’m 70 and need all the assistance I can get!  
Many thanks in advance!

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/jkwilborn/32/687_2.png) [@jkwilborn](https://forum.cloudray.com/u/jkwilborn)\
**Post date:** [June 7, 2024, 1:13pm UTC](https://forum.cloudray.com/t/converting-an-oem-jg40-to-an-m60-cloudray/1490/2 "2024-06-07T13:13:17Z")

</div>

I am not related to Cloudray, just another user.

I think this conversion pdf will help you.

> **[K40 LPS Type Interconnection & Conversion](https://forum.makerforums.info/t/k40-lps-type-interconnection-conversion/82395)**
>
> I have been meaning to do this for some time. Since I spend so much time with LPS configuration, wiring, conversions, etc(etc(etc etc.etc)) I created a cheat sheet for mine and others to use. The included chart is intended to link the common...

Good luck

😺

---

<div class="post-metadata">

**Author:** ![Tzsetzse](https://avatars.discourse-cdn.com/v4/letter/t/e9bcb4/32.png) [@Tzsetzse](https://forum.cloudray.com/u/Tzsetzse)\
**Post date:** [June 7, 2024, 4:25pm UTC](https://forum.cloudray.com/t/converting-an-oem-jg40-to-an-m60-cloudray/1490/3 "2024-06-07T16:25:07Z")

</div>

Many, MANY thanks!

Don