# Constantly connects and disconnects

**URL:** <https://forum.cloudray.com/t/constantly-connects-and-disconnects/1432>\
**Category:** Uncategorized\
**Created:** [March 3, 2024, 2:41am UTC](https://forum.cloudray.com/t/constantly-connects-and-disconnects/1432 "2024-03-03T02:41:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tcurry123](https://avatars.discourse-cdn.com/v4/letter/t/cab0a1/32.png) [@Tcurry123](https://forum.cloudray.com/u/Tcurry123)\
**Post date:** [March 3, 2024, 2:41am UTC](https://forum.cloudray.com/t/constantly-connects-and-disconnects/1432/1 "2024-03-03T02:41:37Z")

</div>

I have a 50w JPT laser. It was working fine then started constantly disconnecting a reconnecting to the computer. Any advice is greatly appreciated.

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/jkwilborn/32/687_2.png) [@jkwilborn](https://forum.cloudray.com/u/jkwilborn)\
**Post date:** [March 5, 2024, 2:57am UTC](https://forum.cloudray.com/t/constantly-connects-and-disconnects/1432/2 "2024-03-05T02:57:37Z")

</div>

I had a similar issue, it was the usb on the back panel of the laser was not snug… it wiggles out now and then as it’s a rather poor connector…

Good luck

😺