# Config EZCAD

**URL:** <https://forum.cloudray.com/t/config-ezcad/260>\
**Category:** Software\
**Created:** [April 12, 2021, 10:04am UTC](https://forum.cloudray.com/t/config-ezcad/260 "2021-04-12T10:04:21Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [April 12, 2021, 10:04am UTC](https://forum.cloudray.com/t/config-ezcad/260/1 "2021-04-12T10:04:21Z")

</div>

![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/766d64b2959f19ba0f29b40f7c49427c9390a3ad.png)  
Set the power matching table  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/64e4d6431df1ed8c71e7e901d48b2f16e1f51f63.png)  
IO Setup:  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/780b442bea575933c9a7ed582222e48ad4f9319a.png)  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/4b4072eda7be1038199af01e5960f6ee67844eb2.png)  
Red Pointer output adjust:  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/63859a16c6aeb5376472081da9179621c30283ae.png)  
1、 EZCAD-Param(F3)-adjust galvo head, F-theta lens, fiber source.  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/1606027d4f1e8ac9086dab4163fac441370f11bb.png)  
Make a mark like ‘田’

Make a square size with the same for F-theta Lens, such as 110x110mm.

‘Ctrl+T’ copy the line.

Find the correct height (focusing Point).

Measure the length for 3x line(X axis) and 3x line(Y axis).They should be the same.  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/0dad62ab33fd90c95e7045062d31006f7f39fdfe.png)  
Rotary:  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/e7896e5213c143e914b3584694f1f218b1c74cf8.png)  
Menu-Laser-SplitMark2  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/bdef6063c815318073e4b17950552fe2ebca794e.png)  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/cloudray/original/1X/10acd791790ac18b7edb67d61e167d00abda4a77.png)

---

<div class="post-metadata">

**Author:** ![TroyM](https://avatars.discourse-cdn.com/v4/letter/t/439d5e/32.png) [@TroyM](https://forum.cloudray.com/u/TroyM)\
**Post date:** [September 30, 2021, 3:39am UTC](https://forum.cloudray.com/t/config-ezcad/260/2 "2021-09-30T03:39:06Z")

</div>

I have a FM14LM50WRA5 which I thought was a raycus. What should the settings be for the laser control?

---

<div class="post-metadata">

**Author:** ![Polaris](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/polaris/32/831_2.png) [@Polaris](https://forum.cloudray.com/u/Polaris)\
**Post date:** [October 4, 2021, 3:38am UTC](https://forum.cloudray.com/t/config-ezcad/260/3 "2021-10-04T03:38:55Z")

</div>

Hello, these basic settings are processed when the marking machine leaves the factory.  
What do you means about the settings be for the laser control？Can you describe in detail？

---

<div class="post-metadata">

**Author:** ![Technician](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/technician/32/15_2.png) [@Technician](https://forum.cloudray.com/u/Technician)\
**Post date:** [October 7, 2021, 1:03am UTC](https://forum.cloudray.com/t/config-ezcad/260/4 "2021-10-07T01:03:29Z")

</div>

Hello,Polaris!All settings are saved in the software.