# Cloudray integrated control card

**URL:** <https://forum.cloudray.com/t/cloudray-integrated-control-card/1033>\
**Category:** Controller\
**Created:** [January 27, 2023, 9:19am UTC](https://forum.cloudray.com/t/cloudray-integrated-control-card/1033 "2023-01-27T09:19:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![snezama](https://avatars.discourse-cdn.com/v4/letter/s/e9a140/32.png) [@snezama](https://forum.cloudray.com/u/snezama)\
**Post date:** [January 27, 2023, 9:19am UTC](https://forum.cloudray.com/t/cloudray-integrated-control-card/1033/1 "2023-01-27T09:19:14Z")

</div>

Hi,

I am about to finalize my order of CF-30 which has a “cloudray integrated control card” and also a “BJJCZ Control board”.

- The later, I assume to be working fine with Lightburn (with galvo license), correct?

- The CF-30 is delivered with a touchscreen control panel, which runs with a self-developed software by CloudRay. Can the user transfer files to this controller? or only the files should be generated on that software?

- Has anyone experience with the “Cloudray integrated control card” and touchscreen controller?

Thanks for your responses and feedback.

Nezam,

---

<div class="post-metadata">

**Author:** ![Joannes1](https://avatars.discourse-cdn.com/v4/letter/j/94ad74/32.png) [@Joannes1](https://forum.cloudray.com/u/Joannes1)\
**Post date:** [January 29, 2023, 3:52am UTC](https://forum.cloudray.com/t/cloudray-integrated-control-card/1033/2 "2023-01-29T03:52:55Z")

</div>

If you use an integrated control card with a touch screen, you can directly insert the U disk into the USB port on the back of the machine and upload files. If you want to use lightburn with it, you can replace it with a BZJCZ control card

---

<div class="post-metadata">

**Author:** ![jkwilborn](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.cloudray.com/jkwilborn/32/687_2.png) [@jkwilborn](https://forum.cloudray.com/u/jkwilborn)\
**Post date:** [March 4, 2023, 4:56am UTC](https://forum.cloudray.com/t/cloudray-integrated-control-card/1033/3 "2023-03-04T04:56:17Z")

</div>

From what I can tell, if it supports EZCad2, lightburn will run.

If it’s an EZCad3 card it’s not supported by Lightburn…

I have a MP-60 JPT MOPA runs just fine with Lightburn…

😺