# Laser DIY Tutorial
**URL:** https://forum.cloudray.com/c/laser-diy-tutorial/71.md?page=1
[Latest](https://forum.cloudray.com/latest.md) · [Categories](https://forum.cloudray.com/categories.md)
**Page:** 2
---
## [Cutting 1/4'' Aluminum 50W JPT](https://forum.cloudray.com/t/cutting-1-4-aluminum-50w-jpt/709)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 21, 2022, 6:22am UTC](https://forum.cloudray.com/t/cutting-1-4-aluminum-50w-jpt/709 "2022-01-21T06:22:06Z")
70lens 50w 1000speed 90 power 0.06hatch 48kzh
---
## [Mark black on brass--50W JPT](https://forum.cloudray.com/t/mark-black-on-brass-50w-jpt/704)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 19, 2022, 9:33am UTC](https://forum.cloudray.com/t/mark-black-on-brass-50w-jpt/704 "2022-01-19T09:33:30Z")
175 lens 50w hatch 0.01 speed 1000 power 50% 80kzh
---
## [Xtool D1 10 watt laser，ceramic tile](https://forum.cloudray.com/t/xtool-d1-10-watt-laser-ceramic-tile/706)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 20, 2022, 5:24am UTC](https://forum.cloudray.com/t/xtool-d1-10-watt-laser-ceramic-tile/706 "2022-01-20T05:24:22Z")
Clean a white ceramic tile with acetone then spray with white enamel. Let it dry then spray with red enamel then black enamel. The settings in Lightburn Speed: 3000 Power: 20 Min Power: 12.5 Mode: Dither Inverted f…
---
## [Fiber Laser Parameter Settings--Raycus&JPT](https://forum.cloudray.com/t/fiber-laser-parameter-settings-raycus-jpt/691)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 15, 2022, 7:08am UTC](https://forum.cloudray.com/t/fiber-laser-parameter-settings-raycus-jpt/691 "2022-01-15T07:08:08Z")
parameter settings.xlsx (11.7 KB)
---
## [Leather iPhone case. Leather default settings in laserbox basic](https://forum.cloudray.com/t/leather-iphone-case-leather-default-settings-in-laserbox-basic/690)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 15, 2022, 7:01am UTC](https://forum.cloudray.com/t/leather-iphone-case-leather-default-settings-in-laserbox-basic/690 "2022-01-15T07:01:43Z")
---
## [JPT 50W,deep engraving test](https://forum.cloudray.com/t/jpt-50w-deep-engraving-test/689)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 14, 2022, 9:36am UTC](https://forum.cloudray.com/t/jpt-50w-deep-engraving-test/689 "2022-01-14T09:36:16Z")
S 1600, P 75, 100kHz, 2x Hatch 0,90°
---
## [Copper and Brass coin blank from a US based mint with 50W JPT laser](https://forum.cloudray.com/t/copper-and-brass-coin-blank-from-a-us-based-mint-with-50w-jpt-laser/688)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 13, 2022, 8:19am UTC](https://forum.cloudray.com/t/copper-and-brass-coin-blank-from-a-us-based-mint-with-50w-jpt-laser/688 "2022-01-13T08:19:17Z")
1000mm/s, 80% power, 40 freq .0252 hatch, auto rotate 11.73 degrees, 80 passes per side plus cleanup and an hour of post engraving with the flex shaft and jewelry tumbler. All in about 3 hours in each. 50w JPT
---
## [50w JPT,A little relief engraving](https://forum.cloudray.com/t/50w-jpt-a-little-relief-engraving/678)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 7, 2022, 6:24am UTC](https://forum.cloudray.com/t/50w-jpt-a-little-relief-engraving/678 "2022-01-07T06:24:53Z")
Material is stainless steel, .075" depth on a 1" coin.
---
## [Glass Xmas ornament using LBT on 30w Raycus](https://forum.cloudray.com/t/glass-xmas-ornament-using-lbt-on-30w-raycus/677)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 7, 2022, 5:12am UTC](https://forum.cloudray.com/t/glass-xmas-ornament-using-lbt-on-30w-raycus/677 "2022-01-07T05:12:03Z")
100, 45, 71
---
## [JPT MOPA on zippo](https://forum.cloudray.com/t/jpt-mopa-on-zippo/676)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 7, 2022, 5:02am UTC](https://forum.cloudray.com/t/jpt-mopa-on-zippo/676 "2022-01-07T05:02:59Z")
a 220mm lens with 50% power and around 700 to 800 speed.Using .002 to .004 with bi directional hatch or dashed hatch.
---
## [50w jpt mopa](https://forum.cloudray.com/t/50w-jpt-mopa/673)
**Author:** [@Austin](https://forum.cloudray.com/u/Austin)\
**Replies:** 0\
**Last updated:** [January 5, 2022, 6:27am UTC](https://forum.cloudray.com/t/50w-jpt-mopa/673 "2022-01-05T06:27:34Z")
---
## [Black Mark on Stainless Steel | Z-Marking | 30W JPT Fiber Laser](https://forum.cloudray.com/t/black-mark-on-stainless-steel-z-marking-30w-jpt-fiber-laser/672)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [January 4, 2022, 9:58am UTC](https://forum.cloudray.com/t/black-mark-on-stainless-steel-z-marking-30w-jpt-fiber-laser/672 "2022-01-04T09:58:22Z")
From:\[laser everything\]–UNREAL Black Mark on Stainless Steel | Z-Marking | Fiber Laser Tutorial - YouTube
---
## [Engraving on Hologram scratch paper with 10w Diode Laser](https://forum.cloudray.com/t/engraving-on-hologram-scratch-paper-with-10w-diode-laser/667)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [December 31, 2021, 2:43am UTC](https://forum.cloudray.com/t/engraving-on-hologram-scratch-paper-with-10w-diode-laser/667 "2021-12-31T02:43:18Z")
Greyscale 318 PDI 10000 mm/m 50% max power
---
## [The permanent black marking down on Stainless](https://forum.cloudray.com/t/the-permanent-black-marking-down-on-stainless/666)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [December 31, 2021, 2:18am UTC](https://forum.cloudray.com/t/the-permanent-black-marking-down-on-stainless/666 "2021-12-31T02:18:53Z")
30w litemarker Speed 50 Power 35 Frequency 25 Thanks to Alex at #lasereverything for his Z Mark video
---
## [Xtool D1 Engraving on a dish](https://forum.cloudray.com/t/xtool-d1-engraving-on-a-dish/665)
**Author:** [@JasonWard](https://forum.cloudray.com/u/JasonWard)\
**Replies:** 0\
**Last updated:** [December 31, 2021, 1:52am UTC](https://forum.cloudray.com/t/xtool-d1-engraving-on-a-dish/665 "2021-12-31T01:52:30Z")
1400/80 2 coats of grey metal primer spray paint.dryed engrave it and cleaned it with lacker thinner
---
## [10w D1.Engraving on the pen](https://forum.cloudray.com/t/10w-d1-engraving-on-the-pen/654)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [December 25, 2021, 8:29am UTC](https://forum.cloudray.com/t/10w-d1-engraving-on-the-pen/654 "2021-12-25T08:29:01Z")
Power 70 speed 40
---
## [I engraved macaroons with everyone's first names. LaserPecker](https://forum.cloudray.com/t/i-engraved-macaroons-with-everyones-first-names-laserpecker/653)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [December 25, 2021, 5:37am UTC](https://forum.cloudray.com/t/i-engraved-macaroons-with-everyones-first-names-laserpecker/653 "2021-12-25T05:37:15Z")
the settings are 100 and 90%.
---
## [Coated tumbler engrave](https://forum.cloudray.com/t/coated-tumbler-engrave/652)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [December 25, 2021, 5:34am UTC](https://forum.cloudray.com/t/coated-tumbler-engrave/652 "2021-12-25T05:34:59Z")
---
## [Using Laserbox Basic for the engrave](https://forum.cloudray.com/t/using-laserbox-basic-for-the-engrave/640)
**Author:** [@Austin](https://forum.cloudray.com/u/Austin)\
**Replies:** 0\
**Last updated:** [December 13, 2021, 9:26am UTC](https://forum.cloudray.com/t/using-laserbox-basic-for-the-engrave/640 "2021-12-13T09:26:23Z")
I sprayed the tumbler with LaserBond 100, Stainless Steel Setting, 100% power, 25mm/s
---
## [Marking on Metal Travel Card by EM Smart](https://forum.cloudray.com/t/marking-on-metal-travel-card-by-em-smart/637)
**Author:** [@Goodman](https://forum.cloudray.com/u/Goodman)\
**Replies:** 0\
**Last updated:** [December 13, 2021, 7:24am UTC](https://forum.cloudray.com/t/marking-on-metal-travel-card-by-em-smart/637 "2021-12-13T07:24:48Z")
1200mm/s, 40% power and 20khz with 0.05mm line distance.
---
## [Still having a hell of a time with learning how to use my fiber laser](https://forum.cloudray.com/t/still-having-a-hell-of-a-time-with-learning-how-to-use-my-fiber-laser/636)
**Author:** [@Davidharris](https://forum.cloudray.com/u/Davidharris)\
**Replies:** 1\
**Last updated:** [December 13, 2021, 6:30am UTC](https://forum.cloudray.com/t/still-having-a-hell-of-a-time-with-learning-how-to-use-my-fiber-laser/636 "2021-12-13T06:30:53Z")
power 80%,speed 50
[Previous page](https://forum.cloudray.com/c/laser-diy-tutorial/71.md)